What You Need to Get Started
To use a 3" cut off wheel with an air cut off tool or air die grinder, you need two main parts: the wheel itself and the correct mandrel (arbor). The Drill Hog® 3" Cut Off Wheel has a 3/8" center hole and is rated for 25,000 RPM. It is designed for metal cutting including steel, stainless steel, aluminum, rebar, and angle iron.
The matching Drill Hog USA Mandrel for Air Cut Off Tool has a 1/4" arbor that fits 1/4" air die grinders and air cut off tools. The mandrel is made of rust-resistant zinc and allows you to mount the 3" wheel securely.
Key Specifications at a Glance
- 3" Cut Off Wheel + 1/4" Mandrel for Air Cut Off Tool Fits 1/4 Air Tool Drill Hog: 3" diameter, 1/16" thick, 3/8" arbor hole, 25,000 RPM max speed. These dimensions tell you the wheel fits standard 3" cut off applications and must be paired with a mandrel that has a 3/8" shoulder or adapter.

3" Cut Off Wheel + 1/4" Mandrel for Air Cut Off Tool Fits 1/4 Air Tool Drill Hog - 3" Cut Off Wheel + 1/4" Mandrel for Air Cut Off Tool Fits 1/4 Air Tool Drill Hog: Mandrel has a 1/4" arbor, rust-resistant zinc construction. The 1/4" arbor fits most air die grinders and air cut off tools. Zinc resists rust in shop environments.
Step-by-Step: Mounting the Wheel
Follow these steps to safely mount a 3" cut off wheel on an air tool.
- 1. Disconnect the air tool from the air supply: Always disconnect the tool before changing accessories to prevent accidental startup.
- 2. Insert the mandrel into the collet or chuck: The Drill Hog mandrel has a 1/4" arbor. Tighten the collet or chuck securely using the tool's wrench.
- 3. Place the cut off wheel onto the mandrel: The 3/8" center hole of the Drill Hog wheel fits over the mandrel's shoulder. Ensure the wheel sits flat and centered.
- 4. Secure the wheel with the retaining nut or flange: Tighten the nut just enough to hold the wheel firmly. Over-tightening can crack the wheel.
- 5. Reconnect the air supply and test at low speed: Run the tool briefly at low speed to check for wobble or vibration. If smooth, you are ready to cut.
Cutting Tips for Best Results
When cutting metal with a 3" cut off wheel, let the wheel do the work. Apply light, steady pressure and avoid forcing the wheel into the cut. The 1/16" thickness is designed for fast, clean cuts in sheet metal, pipe, conduit, and angle iron.
For stainless steel or hardened materials, use a consistent motion to avoid overheating the wheel. The Drill Hog Cut Off Wheel features an exclusive bonding process with double reinforced X-Cross Fiber, which helps it cut faster and last longer than standard wheels.
Safety Considerations
Always wear eye protection and gloves when using cut off wheels. Ensure the wheel's maximum RPM rating (25,000 RPM) is not exceeded by your air tool. Inspect the wheel for cracks or damage before each use. Do not use a damaged wheel.
The supplied information does not include specific operating instructions beyond the wheel and mandrel specifications. If you are unsure about your tool's compatibility, consult the tool manufacturer's manual.


