Shank fit and chuck questions
- What does "reduced shank" mean on a Silver & Deming bit?
- A reduced shank means the cutting end is larger than the part that goes into the chuck. On a Silver & Deming bit, the shank is turned down to 1/2", so a bit that cuts a 9/16" to 1" hole can still be held by a chuck that accepts a 1/2" shank. The Drill Hog® 8 Pc Tungsten-Molybdenum M2 HSS Silver & Deming Drill Bit Set uses this 1/2" cut down shank across all eight sizes.
- Will these bits fit a standard drill press chuck?
- That depends on your chuck's capacity, not on the bit's cutting diameter. The supplied record confirms a 1/2" shank; it does not state a chuck capacity range. Check your drill press or hand drill chuck's rated capacity before ordering. If your chuck closes to 1/2", the reduced shank is designed to seat there even though the cutting end is larger.
- Why not just use a bit with a full-diameter shank?
- A full-diameter shank would need a chuck that opens to the cutting size, which is often impractical above 1/2". The reduced shank keeps one chuck interface across the whole set. The trade-off is that the shank is the limiting connection point, so the chuck must grip it securely.
- Do the bits come in a case?
- No. The supplied product note states this set does not include a case. Plan storage separately if you want the eight sizes kept together.
Size range and material questions
- What sizes are in the 9/16" to 1" set?
- The set includes eight fractional sizes: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", and 1". Each bit has an overall length of 6". The steps are in 1/16" increments, so you can move up in small jumps rather than jumping from a small pilot hole straight to 1".
- What steel are these bits made from?
- The bits are Tungsten-Molybdenum M2 high speed steel. The supplied description says they were designed for drilling hard steel and lists tough jobs such as truck frames, stainless steel, farm implements, spring steel, and grade 8 bolts. Those are the applications named in the record; the record does not list recommended speeds, feeds, or coolant.
- Does the set carry a warranty?
- Yes. The supplied information states a lifetime warranty to the original purchaser. Keep your purchase record if you may need to make a claim.
Drill Hog® 8 Pc Silver & Deming set: the fit facts
- 9/16" 5/8 11/16 3/4 13/16 7/8 15/16 1" Silver & Deming Drill Bit Set Drill Hog: 1/2" cut down shank This is the interface that lets a bit cutting up to 1" be held by a 1/2" chuck.

9/16" 5/8 11/16 3/4 13/16 7/8 15/16 1" Silver & Deming Drill Bit Set Drill Hog - 9/16" 5/8 11/16 3/4 13/16 7/8 15/16 1" Silver & Deming Drill Bit Set Drill Hog: Sizes: 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" Eight 1/16" steps let you open a hole progressively within the set's range.
- 9/16" 5/8 11/16 3/4 13/16 7/8 15/16 1" Silver & Deming Drill Bit Set Drill Hog: Overall length: 6" The usable reach is set by the 6" overall length; the record does not give a separate flute length.
- 9/16" 5/8 11/16 3/4 13/16 7/8 15/16 1" Silver & Deming Drill Bit Set Drill Hog: Tungsten-Molybdenum M2 HSS steel The material is the basis for the hard-steel applications named in the record.
- 9/16" 5/8 11/16 3/4 13/16 7/8 15/16 1" Silver & Deming Drill Bit Set Drill Hog: This set does not include a case Storage is your responsibility if you want the eight sizes organized together.
What the supplied information does not settle
The record does not give recommended spindle speeds, feed rates, or coolant guidance, so those choices remain yours to make from your own equipment and material guidance. It also does not state a chuck capacity range, a point angle, or a flute length. Treat those as open questions to confirm against your chuck and your work rather than assumptions about the set.


