Masonry Drill Bit and Chisel Set Buying Guide
By Drill Hog® | Published: 2026-10-25
Category: Buying Guides
Learn how to choose the right masonry drill bit and chisel set for concrete, brick, and block. Get practical selection rules and trade-offs for DIYers and pros.
Quick answer
Choose a masonry drill bit and chisel set that covers the anchor sizes you commonly use and includes at least one flat chisel and a pointed chisel for cleanup. The Drill Hog® Masonry Drill Bit and Chisel Set offers a practical range of bits from 3/16" to 9/16" plus three chisels, making it a solid choice for most concrete and brick jobs.
Bit size range matters more than total count
A set with 20 bits that skip common anchor sizes is less useful than a compact set that covers the sizes you actually drill. For residential and light commercial work, bits from 3/16" up to 1/2" handle most tapcon and wedge anchor installations. Larger bits (9/16" and up) are needed for bigger expansion anchors or through-holes for rebar.
The Drill Hog® set includes eight masonry bits from 3/16" to 9/16", which covers the vast majority of concrete anchor and through-hole tasks. If you regularly drill holes larger than 5/8", you will need to buy individual bits beyond this set.
Chisel selection depends on your demolition needs
A pointed chisel is best for breaking up concrete or starting a groove, while a flat chisel is better for smoothing surfaces or chipping away tile and mortar. A wide tile chipping chisel (1-1/2") helps remove large sections of tile or thin-set without damaging the substrate.
The Drill Hog® set includes one pointed chisel, one 7/8" flat chisel, and one 1-1/2" wide tile chipping chisel. This combination works well for general masonry demolition and surface prep, but if you need a heavy-duty scaling or bushing tool, you will need a separate specialty chisel.
SDS vs. straight shank compatibility
Most masonry bits for hammer drills use an SDS-plus or SDS-max shank, but many consumer-grade rotary hammers and combination hammers accept straight shank bits with a three-jaw chuck. Straight shank bits are also compatible with standard drill chucks if you only need occasional masonry drilling.
The Drill Hog® set uses straight shank bits, which fit most hammer drills and standard drills. If you own an SDS-only rotary hammer, you will need an adapter or a separate SDS set. This trade-off makes the set more versatile for users with mixed drill types but less ideal for dedicated SDS-only users.
Decision rules for choosing a masonry drill bit and chisel set
- Rule 1: Match bit sizes to your most common anchors: List the anchor diameters you use most (e.g., 1/4", 3/8", 1/2") and verify the set includes those sizes. A set that skips a size you need every week is a poor value no matter how many bits it contains. Check your anchor inventory before buying.
- Rule 2: Count chisel types, not just chisel count: A set with one pointed and one flat chisel covers basic chipping and smoothing. Adding a wide tile chisel (1-1/2" or wider) helps with tile removal and thin-set cleanup. If you only need one type, a smaller chisel-only set may save money. Choose chisels based on your most frequent demolition task.
- Rule 3: Verify shank compatibility with your hammer drill: Straight shank bits work in standard chucks and many hammer drills. SDS-plus or SDS-max bits require a compatible rotary hammer. If your tool uses SDS, a straight shank set will need an adapter or will not work at all. Know your drill chuck type before ordering.
Product facts
- Drill Hog® Masonry Drill Bit and Chisel Set: Includes eight masonry bits from 3/16" to 9/16" and three chisels: pointed, 7/8" flat, and 1-1/2" wide tile chipping. You get a practical range of common anchor sizes and three chisel types for concrete, brick, and tile work in one kit.
Drill Hog® Masonry Drill Bit and Chisel Set
Who this set fits best
Best for
- DIYers and light-commercial users who need a versatile set for concrete anchors, brick drilling, and basic tile or mortar removal
- Users with a standard hammer drill or combination drill who want straight shank bits that also work in a regular drill chuck
Not for
- Professionals who need only SDS-plus or SDS-max bits for dedicated rotary hammers
- Users who regularly drill holes larger than 5/8" or need specialty chisels like bushing tools or clay spades
