What Are Left Handed Drill Bits and When Should You Use Them?
Left handed drill bits are designed to rotate counter-clockwise, opposite to standard right handed bits. Their main job is to remove broken bolts, screws, and studs that are stuck in a workpiece. When the bit bites into the broken fastener, the counter-clockwise torque often spins the fastener out, saving you from using a separate extractor.
These bits are especially useful when a bolt has snapped off flush or below the surface, and you don't have access to the head. They work on right hand threaded fasteners (the most common type) because the bit's rotation matches the loosening direction.
Key Features of the Drill Hog® 5 Piece Left Handed Set
- Drill Hog® 5 Pc Left Handed Drill Bit Set Niobium Nb41 with Free Cutting Oil Sample: Made from Niobium Nb41 steel with a melting point of 4476°F. Niobium Nb41 is a high-performance steel that withstands the heat and friction of drilling into hardened steel bolts without losing its edge.

Drill Hog® 5 Pc Left Handed Drill Bit Set Niobium Nb41 with Free Cutting Oil Sample - Drill Hog® 5 Pc Left Handed Drill Bit Set Niobium Nb41 with Free Cutting Oil Sample: Includes five screw machine length (stubby) bits: 1/8", 3/16", 1/4", 5/16", and 3/8". Stubby bits are less likely to wander and are easier to control in tight spaces, making them ideal for broken bolt removal in engines, machinery, and farm equipment.
- Drill Hog® 5 Pc Left Handed Drill Bit Set Niobium Nb41 with Free Cutting Oil Sample: Split point tip prevents slipping and requires no pilot hole or starter bit. You can start drilling directly on the broken bolt without needing to center punch or pre-drill, saving time and reducing the chance of damaging the surrounding material.
- Drill Hog® 5 Pc Left Handed Drill Bit Set Niobium Nb41 with Free Cutting Oil Sample: Comes with a free cutting oil sample. Cutting oil reduces friction and heat, extending bit life and improving cutting action, especially in tough steel fasteners.
How to Use Left Handed Drill Bits to Remove a Broken Bolt
Follow these steps for best results with a left handed drill bit set like the Drill Hog® 5 piece set.
- 1. Select the right bit size: Choose a bit slightly smaller than the broken bolt's minor diameter. The set includes 1/8", 3/16", 1/4", 5/16", and 3/8" bits. For a 3/8" bolt, start with the 1/4" or 5/16" bit.
- 2. Insert the bit into your drill: Secure the left handed bit in a drill chuck. Make sure the bit is centered and tight.
- 3. Set your drill to reverse (counter-clockwise): Left handed bits must rotate counter-clockwise. Your drill's reverse setting is the correct direction.
- 4. Apply cutting oil: Use the included cutting oil sample on the bit tip and the broken bolt surface. This reduces heat and helps the bit cut smoothly.
- 5. Drill slowly and steadily: Place the bit tip against the center of the broken bolt. Apply light, steady pressure. The split point will bite without walking. As the bit cuts, the left hand rotation will often grab the bolt and spin it out.
- 6. Remove the bolt: If the bit doesn't spin the bolt out on its own, continue drilling until the bolt loosens or you can use a screw extractor. Often the bit itself acts as the extractor.
When Are Left Handed Bits Not the Best Choice?
Left handed bits work best on right hand threaded fasteners that are made of softer steel or are not seized by rust. If the bolt is extremely hard, heat-treated, or corroded beyond the bit's capacity, you may need a carbide bit or a spiral screw extractor.
Also, these bits are not designed for general purpose drilling in wood or soft materials; they are specialized for fastener removal. For general drilling, use standard right handed bits.
The set's five sizes cover common bolt diameters up to 3/8", but larger or smaller fasteners will require a different set. Always match the bit size to the fastener for best results.


